Search This Blog

2009-09-30

Plasma BT-1 Etcher






The BT-1 is a complete industrial solution to medium to large scale surface preparation and processing with Plasma.

The large all aluminum chamber accommodates a generously sized active processing surface and as with our standard configuration of five levels of electrodes, provides you with 2100 square inches of useable plasma processing area.
The compact footprint takes up very little space for the work it accomplishes.

Our standard vacuum pump is especially prepared for oxygen service. It is fully equipped with an N2 purge system, preventing any corrosive end products forming in the pump thus extending the service life and reducing the maintenance cycle.

Processing your product, whether it be small or large plastic parts, medical implants, wafers or electrical components, you will find that all are uniformly treated by the BT-1. Benefits to you are better adhesion or marking, cleaner parts with less labor and reduced chemical expense by eliminating unwelcome and often expensive chemical waste associated with cleaning and priming.

Our simple to use, intuitive touch screen interface has control over every aspect of the plasma process ensuring reliability and repeatability. Combined with the optional computer control, we offer process data review via the system PC or network.

We can custom configure the electrode to suit your production needs including custom sized horizontal electrodes, RIE (Reactive Ion Etch) and Semiconductor Lead Frame Carriers.

Low cost to maintain equates to low cost of ownership. Rest assured that Plasma Etch will be there for you as long as you own your system

2009-09-28

ASTECH Automatic Matching Controller RC-11




Manufacturer: ASTECH Japan
Type: Automatic Matching Controller
Model: RC-11
Year (or range of years): 2000
Condition: Excellent

Description:
RC-11 Separate Controller
Should the user require an external controller, the “T-series” matching network can be supplied with an RC-11 controller. The controller can be installed at a remote location, such as in a system control rack, for easy access by the operator. Also the size of the matching network can be reduced, since the controller is external.

The RC-11 controller is provided with tune/load position indicators, status indicators, controls and analog remote signals necessary for system control.

SET: TH-20R S/N H2099
RC-11 S/N1075

Welcome For Inspection

Thanks
Semimax Korea Corporation
sales@semimax.com

2009-09-27

Seren R600 13.56Mhz RF Plasma Generator




Description: Seren R600 RF 13.56 Generator
Serial no: R600-6188-13R1
Model No: Seren IPS R600
AMPS: 10 Hertz: 47/63
Vintage : 08-16-1999
Power Output: 600W into 50 ohms.
Output Frequency: 13.56 MHz. Connector "N" Type Functionality Item is used but has been tested and is operating properly.

Welcome for inspection

Thanks
Semimax Korea Corporation
sales@semimax.com

Used TT-1 Turn Table Plasma Etcher For Sales

TT-1 is a plasma system having a rotating electrode designed to meet the needs of the wire bonding industry having the capacity to evenly process multiple slotted lead frame magazines. Based on our popular BT-1, it shares the same robust and reliable characteristics while providing yet another example of Plasma Etch innovation. The large all aluminum chamber accommodates a generously sized circular, rotating active processing surface has the option of insulated or direct on electrode method of treatment. Its industrial powder coated frame has a rugged and easy to clean design with an eye to guarding your processing environment from contamination and with its compact footprint takes up so very little space for the work it accomplishes. You will find in the processing of our lead frames, that uniformity is the key. Benefits to you are better pull and shear yielding less labor, less rejected parts and reduced chemical expense by eliminating unwelcome and often expensive chemical waste associated with chemical methods. Our simple to use, intuitive touch screen interface has control over every aspect of the plasma process ensuring reliability and repeatability. Low cost to maintain equates to low cost of ownership. Rest assured that Plasma Etch will be there for you as long as you own your system.

2009-09-25

Alphasem SL9022 12" Die Attach For Sales





ALPHASEM Swissline 9022 HSL BOC / Epoxy Die Bonders, 12"
> 80µm chip thickness
Needle-less pickup option
Placement accuracy: +/- 40µm (x,y); +/- 0,25° (Theta)
Lamination force
Single die lamination
Multi-magazine input
Dispense unit